Debezium PostgresSQL Connector

Since Camel 3.0

Only consumer is supported

The Debezium PostgresSQL component is wrapper around Debezium using Debezium Engine, which enables Change Data Capture from PostgresSQL database using Debezium without the need for Kafka or Kafka Connect.

Note on handling failures: per Debezium Embedded Engine documentation, the engines are actively recording source offsets and periodically flush these offsets to a persistent storage. Therefore, when the application is restarted or crashed, the engine will resume from the last recorded offset. This means that, at normal operation, your downstream routes will receive each event exactly once. However, in case of an application crash (not having a graceful shutdown), the application will resume from the last recorded offset, which may result in receiving duplicate events immediately after the restart. Therefore, your downstream routes should be tolerant enough of such a case and deduplicate events if needed.

Maven users will need to add the following dependency to their pom.xml for this component.

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-debezium-postgres</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

debezium-postgres:name[?options]

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The Debezium PostgresSQL Connector component supports 111 options, which are listed below.

Name Description Default Type

additionalProperties (common)

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro.

Map

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

configuration (consumer)

Allow pre-configured Configurations to be set.

PostgresConnectorEmbeddedDebeziumConfiguration

internalKeyConverter (consumer)

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

internalValueConverter (consumer)

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

offsetCommitPolicy (consumer)

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

String

offsetCommitTimeoutMs (consumer)

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds.

5000

long

offsetFlushIntervalMs (consumer)

Interval at which to try committing offsets. The default is 1 minute.

60000

long

offsetStorage (consumer)

The name of the Java class that is responsible for persistence of connector offsets.

org.apache.kafka.connect.storage.FileOffsetBackingStore

String

offsetStorageFileName (consumer)

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

offsetStoragePartitions (consumer)

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

int

offsetStorageReplicationFactor (consumer)

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore.

int

offsetStorageTopic (consumer)

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

binaryHandlingMode (postgres)

Specify how binary (blob, binary, etc.) columns should be represented in change events, including: 'bytes' represents binary data as byte array (default); 'base64' represents binary data as base64-encoded string; 'base64-url-safe' represents binary data as base64-url-safe-encoded string; 'hex' represents binary data as hex-encoded (base16) string.

bytes

String

columnExcludeList (postgres)

Regular expressions matching columns to exclude from change events.

String

columnIncludeList (postgres)

Regular expressions matching columns to include in change events.

String

columnPropagateSourceType (postgres)

A comma-separated list of regular expressions matching fully-qualified names of columns that adds the columns original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

converters (postgres)

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'.

String

customMetricTags (postgres)

The custom metric tags will accept key-value pairs to customize the MBean object name which should be appended the end of regular name, each key would represent a tag for the MBean object name, and the corresponding value would be the value of that tag the key is. For example: k1=v1,k2=v2.

String

databaseDbname (postgres)

The name of the database from which the connector should capture changes.

String

databaseHostname (postgres)

Resolvable hostname or IP address of the database server.

String

databaseInitialStatements (postgres)

A semicolon separated list of SQL statements to be executed when a JDBC connection to the database is established. Note that the connector may establish JDBC connections at its own discretion, so this should typically be used for configuration of session parameters only, but not for executing DML statements. Use doubled semicolon (';;') to use a semicolon as a character and not as a delimiter.

String

databasePassword (postgres)

Required Password of the database user to be used when connecting to the database.

String

databasePort (postgres)

Port of the database server.

5432

int

databaseQueryTimeoutMs (postgres)

Time to wait for a query to execute, given in milliseconds. Defaults to 600 seconds (600,000 ms); zero means there is no limit.

10m

int

databaseSslcert (postgres)

File containing the SSL Certificate for the client. See the Postgres SSL docs for further information.

String

databaseSslfactory (postgres)

A name of class to that creates SSL Sockets. Use org.postgresql.ssl.NonValidatingFactory to disable SSL validation in development environments.

String

databaseSslkey (postgres)

File containing the SSL private key for the client. See the Postgres SSL docs for further information.

String

databaseSslmode (postgres)

Whether to use an encrypted connection to Postgres. Options include: 'disable' (the default) to use an unencrypted connection; 'allow' to try and use an unencrypted connection first and, failing that, a secure (encrypted) connection; 'prefer' (the default) to try and use a secure (encrypted) connection first and, failing that, an unencrypted connection; 'require' to use a secure (encrypted) connection, and fail if one cannot be established; 'verify-ca' like 'required' but additionally verify the server TLS certificate against the configured Certificate Authority (CA) certificates, or fail if no valid matching CA certificates are found; or 'verify-full' like 'verify-ca' but additionally verify that the server certificate matches the host to which the connection is attempted.

prefer

String

databaseSslpassword (postgres)

Password to access the client private key from the file specified by 'database.sslkey'. See the Postgres SSL docs for further information.

String

databaseSslrootcert (postgres)

File containing the root certificate(s) against which the server is validated. See the Postgres JDBC SSL docs for further information.

String

databaseTcpkeepalive (postgres)

Enable or disable TCP keep-alive probe to avoid dropping TCP connection.

true

boolean

databaseUser (postgres)

Name of the database user to be used when connecting to the database.

String

datatypePropagateSourceType (postgres)

A comma-separated list of regular expressions matching the database-specific data type names that adds the data type’s original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

decimalHandlingMode (postgres)

Specify how DECIMAL and NUMERIC columns should be represented in change events, including: 'precise' (the default) uses java.math.BigDecimal to represent values, which are encoded in the change events using a binary representation and Kafka Connect’s 'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent values; 'double' represents values using Java’s 'double', which may not offer the precision but will be far easier to use in consumers.

precise

String

errorsMaxRetries (postgres)

The maximum number of retries on connection errors before failing (-1 = no limit, 0 = disabled, 0 = num of retries).

-1

int

eventProcessingFailureHandlingMode (postgres)

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including: 'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped; 'ignore' the problematic event will be skipped.

fail

String

flushLsnSource (postgres)

Boolean to determine if Debezium should flush LSN in the source postgres database. If set to false, user will have to flush the LSN manually outside Debezium.

true

boolean

heartbeatActionQuery (postgres)

The query executed with every heartbeat.

String

heartbeatIntervalMs (postgres)

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default.

0ms

int

heartbeatTopicsPrefix (postgres)

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

__debezium-heartbeat

String

hstoreHandlingMode (postgres)

Specify how HSTORE columns should be represented in change events, including: 'json' represents values as string-ified JSON (default); 'map' represents values as a key/value map.

json

String

includeSchemaComments (postgres)

Whether the connector parse table and column’s comment to metadata object. Note: Enable this option will bring the implications on memory usage. The number and size of ColumnImpl objects is what largely impacts how much memory is consumed by the Debezium connectors, and adding a String to each of them can potentially be quite heavy. The default is 'false'.

false

boolean

includeUnknownDatatypes (postgres)

Specify whether the fields of data type not supported by Debezium should be processed: 'false' (the default) omits the fields; 'true' converts the field into an implementation dependent binary representation.

false

boolean

incrementalSnapshotChunkSize (postgres)

The maximum size of chunk (number of documents/rows) for incremental snapshotting.

1024

int

incrementalSnapshotWatermarkingStrategy (postgres)

Specify the strategy used for watermarking during an incremental snapshot: 'insert_insert' both open and close signal is written into signal data collection (default); 'insert_delete' only open signal is written on signal data collection, the close will delete the relative open signal;.

INSERT_INSERT

String

intervalHandlingMode (postgres)

Specify how INTERVAL columns should be represented in change events, including: 'string' represents values as an exact ISO formatted string; 'numeric' (default) represents values using the inexact conversion into microseconds.

numeric

String

maxBatchSize (postgres)

Maximum size of each batch of source records. Defaults to 2048.

2048

int

maxQueueSize (postgres)

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

8192

int

maxQueueSizeInBytes (postgres)

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled.

0

long

messageKeyColumns (postgres)

A semicolon-separated list of expressions that match fully-qualified tables and column(s) to be used as message key. Each expression must match the pattern ':', where the table names could be defined as (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific connector, and the key columns are a comma-separated list of columns representing the custom key. For any table without an explicit key configuration the table’s primary key column(s) will be used as message key. Example: dbserver1.inventory.orderlines:orderId,orderLineId;dbserver1.inventory.orders:id.

String

messagePrefixExcludeList (postgres)

A comma-separated list of regular expressions that match the logical decoding message prefixes to be excluded from monitoring.

String

messagePrefixIncludeList (postgres)

A comma-separated list of regular expressions that match the logical decoding message prefixes to be monitored. All prefixes are monitored by default.

String

notificationEnabledChannels (postgres)

List of notification channels names that are enabled.

String

notificationSinkTopicName (postgres)

The name of the topic for the notifications. This is required in case 'sink' is in the list of enabled channels.

String

pluginName (postgres)

The name of the Postgres logical decoding plugin installed on the server. Supported values are 'decoderbufs' and 'pgoutput'. Defaults to 'decoderbufs'.

decoderbufs

String

pollIntervalMs (postgres)

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms.

500ms

long

postProcessors (postgres)

Optional list of post processors. The processors are defined using '.type' config option and configured using options ''.

String

provideTransactionMetadata (postgres)

Enables transaction metadata extraction together with event counting.

false

boolean

publicationAutocreateMode (postgres)

Applies only when streaming changes using pgoutput.Determine how creation of a publication should work, the default is all_tables.DISABLED - The connector will not attempt to create a publication at all. The expectation is that the user has created the publication up-front. If the publication isn’t found to exist upon startup, the connector will throw an exception and stop.ALL_TABLES - If no publication exists, the connector will create a new publication for all tables. Note this requires that the configured user has access. If the publication already exists, it will be used. i.e CREATE PUBLICATION FOR ALL TABLES;FILTERED - If no publication exists, the connector will create a new publication for all those tables matchingthe current filter configuration (see table/database include/exclude list properties). If the publication already exists, it will be used. i.e CREATE PUBLICATION FOR TABLE.

all_tables

String

publicationName (postgres)

The name of the Postgres 10 publication used for streaming changes from a plugin. Defaults to 'dbz_publication'.

dbz_publication

String

queryFetchSize (postgres)

The maximum number of records that should be loaded into memory while streaming. A value of '0' uses the default JDBC fetch size.

0

int

replicaIdentityAutosetValues (postgres)

Applies only when streaming changes using pgoutput.Determines the value for Replica Identity at table level. This option will overwrite the existing value in databaseA comma-separated list of regular expressions that match fully-qualified tables and Replica Identity value to be used in the table. Each expression must match the pattern ':', where the table names could be defined as (SCHEMA_NAME.TABLE_NAME), and the replica identity values are: DEFAULT - Records the old values of the columns of the primary key, if any. This is the default for non-system tables.INDEX index_name - Records the old values of the columns covered by the named index, that must be unique, not partial, not deferrable, and include only columns marked NOT NULL. If this index is dropped, the behavior is the same as NOTHING.FULL - Records the old values of all columns in the row.NOTHING - Records no information about the old row. This is the default for system tables.

String

retriableRestartConnectorWaitMs (postgres)

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms.

10s

long

schemaExcludeList (postgres)

The schemas for which events must not be captured.

String

schemaHistoryInternalFileFilename (postgres)

The path to the file that will be used to record the database schema history.

String

schemaIncludeList (postgres)

The schemas for which events should be captured.

String

schemaNameAdjustmentMode (postgres)

Specify how schema names should be adjusted for compatibility with the message converter used by the connector, including: 'avro' replaces the characters that cannot be used in the Avro type name with underscore; 'avro_unicode' replaces the underscore or characters that cannot be used in the Avro type name with corresponding unicode like _uxxxx. Note: _ is an escape sequence like backslash in Java;'none' does not apply any adjustment (default).

none

String

schemaRefreshMode (postgres)

Specify the conditions that trigger a refresh of the in-memory schema for a table. 'columns_diff' (the default) is the safest mode, ensuring the in-memory schema stays in-sync with the database table’s schema at all times. 'columns_diff_exclude_unchanged_toast' instructs the connector to refresh the in-memory schema cache if there is a discrepancy between it and the schema derived from the incoming message, unless unchanged TOASTable data fully accounts for the discrepancy. This setting can improve connector performance significantly if there are frequently-updated tables that have TOASTed data that are rarely part of these updates. However, it is possible for the in-memory schema to become outdated if TOASTable columns are dropped from the table.

columns_diff

String

signalDataCollection (postgres)

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

signalEnabledChannels (postgres)

List of channels names that are enabled. Source channel is enabled by default.

source

String

signalPollIntervalMs (postgres)

Interval for looking for new signals in registered channels, given in milliseconds. Defaults to 5 seconds.

5s

long

skippedOperations (postgres)

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes, 't' for truncates, and 'none' to indicate nothing skipped. By default, only truncate operations will be skipped.

t

String

slotDropOnStop (postgres)

Whether or not to drop the logical replication slot when the connector finishes orderly. By default the replication is kept so that on restart progress can resume from the last recorded location.

false

boolean

slotMaxRetries (postgres)

How many times to retry connecting to a replication slot when an attempt fails.

6

int

slotName (postgres)

The name of the Postgres logical decoding slot created for streaming changes from a plugin. Defaults to 'debezium.

debezium

String

slotRetryDelayMs (postgres)

Time to wait between retry attempts when the connector fails to connect to a replication slot, given in milliseconds. Defaults to 10 seconds (10,000 ms).

10s

long

slotStreamParams (postgres)

Any optional parameters used by logical decoding plugin. Semi-colon separated. E.g. 'add-tables=public.table,public.table2;include-lsn=true'.

String

snapshotDelayMs (postgres)

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms.

0ms

long

snapshotFetchSize (postgres)

The maximum number of records that should be loaded into memory while performing a snapshot.

int

snapshotIncludeCollectionList (postgres)

This setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

snapshotIsolationMode (postgres)

Controls which transaction isolation level is used. The default is 'serializable', which means that serializable isolation level is used. When 'repeatable_read' is specified, connector runs the initial snapshot in REPEATABLE READ isolation level. When 'read_committed' is specified, connector runs the initial snapshot in READ COMMITTED isolation level. In 'read_uncommitted' is specified, connector runs the initial snapshot in READ UNCOMMITTED isolation level.

serializable

String

snapshotLockingMode (postgres)

Controls how the connector holds locks on tables while performing the schema snapshot. The 'shared' which means the connector will hold a table lock that prevents exclusive table access for just the initial portion of the snapshot while the database schemas and other metadata are being read. The remaining work in a snapshot involves selecting all rows from each table, and this is done using a flashback query that requires no locks. However, in some cases it may be desirable to avoid locks entirely which can be done by specifying 'none'. This mode is only safe to use if no schema changes are happening while the snapshot is taken.

none

String

snapshotLockingModeCustomName (postgres)

When 'snapshot.locking.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'SnapshotterLocking' interface and is called to determine how to lock tables during schema snapshot.

String

snapshotLockTimeoutMs (postgres)

The maximum number of millis to wait for table locks at the beginning of a snapshot. If locks cannot be acquired in this time frame, the snapshot will be aborted. Defaults to 10 seconds.

10s

long

snapshotMaxThreads (postgres)

The maximum number of threads used to perform the snapshot. Defaults to 1.

1

int

snapshotMode (postgres)

The criteria for running a snapshot upon startup of the connector. Select one of the following snapshot options: 'always': The connector runs a snapshot every time that it starts. After the snapshot completes, the connector begins to stream changes from the transaction log.; 'initial' (default): If the connector does not detect any offsets for the logical server name, it runs a snapshot that captures the current full state of the configured tables. After the snapshot completes, the connector begins to stream changes from the transaction log. 'initial_only': The connector performs a snapshot as it does for the 'initial' option, but after the connector completes the snapshot, it stops, and does not stream changes from the transaction log.; 'never': The connector does not run a snapshot. Upon first startup, the connector immediately begins reading from the beginning of the transaction log. 'exported': This option is deprecated; use 'initial' instead.; 'custom': The connector loads a custom class to specify how the connector performs snapshots. For more information, see Custom snapshotter SPI in the PostgreSQL connector documentation.

initial

String

snapshotModeConfigurationBasedSnapshotData (postgres)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not.

false

boolean

snapshotModeConfigurationBasedSnapshotOnDataError (postgres)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not in case of error.

false

boolean

snapshotModeConfigurationBasedSnapshotOnSchemaError (postgres)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not in case of error.

false

boolean

snapshotModeConfigurationBasedSnapshotSchema (postgres)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not.

false

boolean

snapshotModeConfigurationBasedStartStream (postgres)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the stream should start or not after snapshot.

false

boolean

snapshotModeCustomName (postgres)

When 'snapshot.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'Snapshotter' interface and is called on each app boot to determine whether to do a snapshot.

String

snapshotQueryMode (postgres)

Controls query used during the snapshot.

select_all

String

snapshotQueryModeCustomName (postgres)

When 'snapshot.query.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'SnapshotterQuery' interface and is called to determine how to build queries during snapshot.

String

snapshotSelectStatementOverrides (postgres)

This property contains a comma-separated list of fully-qualified tables (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific connectors. Select statements for the individual tables are specified in further configuration properties, one for each table, identified by the id 'snapshot.select.statement.overrides.DB_NAME.TABLE_NAME' or 'snapshot.select.statement.overrides.SCHEMA_NAME.TABLE_NAME', respectively. The value of those properties is the select statement to use when retrieving data from the specific table during snapshotting. A possible use case for large append-only tables is setting a specific point where to start (resume) snapshotting, in case a previous snapshotting was interrupted.

String

snapshotTablesOrderByRowCount (postgres)

Controls the order in which tables are processed in the initial snapshot. A descending value will order the tables by row count descending. A ascending value will order the tables by row count ascending. A value of disabled (the default) will disable ordering by row count.

disabled

String

sourceinfoStructMaker (postgres)

The name of the SourceInfoStructMaker class that returns SourceInfo schema and struct.

io.debezium.connector.postgresql.PostgresSourceInfoStructMaker

String

statusUpdateIntervalMs (postgres)

Frequency for sending replication connection status updates to the server, given in milliseconds. Defaults to 10 seconds (10,000 ms).

10s

int

streamingDelayMs (postgres)

A delay period after the snapshot is completed and the streaming begins, given in milliseconds. Defaults to 0 ms.

0ms

long

tableExcludeList (postgres)

A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring.

String

tableIgnoreBuiltin (postgres)

Flag specifying whether built-in tables should be ignored.

true

boolean

tableIncludeList (postgres)

The tables for which changes are to be captured.

String

timePrecisionMode (postgres)

Time, date, and timestamps can be represented with different kinds of precisions, including: 'adaptive' (the default) bases the precision of time, date, and timestamp values on the database column’s precision; 'adaptive_time_microseconds' like 'adaptive' mode, but TIME fields always use microseconds precision; 'connect' always represents time, date, and timestamp values using Kafka Connect’s built-in representations for Time, Date, and Timestamp, which uses millisecond precision regardless of the database columns' precision.

adaptive

String

tombstonesOnDelete (postgres)

Whether delete operations should be represented by a delete event and a subsequent tombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

false

boolean

topicNamingStrategy (postgres)

The name of the TopicNamingStrategy class that should be used to determine the topic name for data change, schema change, transaction, heartbeat event etc.

io.debezium.schema.SchemaTopicNamingStrategy

String

topicPrefix (postgres)

Required Topic prefix that identifies and provides a namespace for the particular database server/cluster is capturing changes. The topic prefix should be unique across all other connectors, since it is used as a prefix for all Kafka topic names that receive events emitted by this connector. Only alphanumeric characters, hyphens, dots and underscores must be accepted.

String

transactionMetadataFactory (postgres)

Class to make transaction context & transaction struct/schemas.

io.debezium.pipeline.txmetadata.DefaultTransactionMetadataFactory

String

unavailableValuePlaceholder (postgres)

Specify the constant that will be provided by Debezium to indicate that the original value is a toasted value not provided by the database. If starts with 'hex:' prefix it is expected that the rest of the string represents hexadecimal encoded octets.

__debezium_unavailable_value

String

xminFetchIntervalMs (postgres)

Specify how often (in ms) the xmin will be fetched from the replication slot. This xmin value is exposed by the slot which gives a lower bound of where a new replication slot could start from. The lower the value, the more likely this value is to be the current 'true' value, but the bigger the performance cost. The bigger the value, the less likely this value is to be the current 'true' value, but the lower the performance penalty. The default is set to 0 ms, which disables tracking xmin.

0ms

long

Endpoint Options

The Debezium PostgresSQL Connector endpoint is configured using URI syntax:

debezium-postgres:name

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

name (consumer)

Required Unique name for the connector. Attempting to register again with the same name will fail.

String

Query Parameters (111 parameters)

Name Description Default Type

additionalProperties (common)

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro.

Map

internalKeyConverter (consumer)

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

internalValueConverter (consumer)

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

offsetCommitPolicy (consumer)

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

String

offsetCommitTimeoutMs (consumer)

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds.

5000

long

offsetFlushIntervalMs (consumer)

Interval at which to try committing offsets. The default is 1 minute.

60000

long

offsetStorage (consumer)

The name of the Java class that is responsible for persistence of connector offsets.

org.apache.kafka.connect.storage.FileOffsetBackingStore

String

offsetStorageFileName (consumer)

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

offsetStoragePartitions (consumer)

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

int

offsetStorageReplicationFactor (consumer)

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore.

int

offsetStorageTopic (consumer)

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

ExchangePattern

binaryHandlingMode (postgres)

Specify how binary (blob, binary, etc.) columns should be represented in change events, including: 'bytes' represents binary data as byte array (default); 'base64' represents binary data as base64-encoded string; 'base64-url-safe' represents binary data as base64-url-safe-encoded string; 'hex' represents binary data as hex-encoded (base16) string.

bytes

String

columnExcludeList (postgres)

Regular expressions matching columns to exclude from change events.

String

columnIncludeList (postgres)

Regular expressions matching columns to include in change events.

String

columnPropagateSourceType (postgres)

A comma-separated list of regular expressions matching fully-qualified names of columns that adds the columns original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

converters (postgres)

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'.

String

customMetricTags (postgres)

The custom metric tags will accept key-value pairs to customize the MBean object name which should be appended the end of regular name, each key would represent a tag for the MBean object name, and the corresponding value would be the value of that tag the key is. For example: k1=v1,k2=v2.

String

databaseDbname (postgres)

The name of the database from which the connector should capture changes.

String

databaseHostname (postgres)

Resolvable hostname or IP address of the database server.

String

databaseInitialStatements (postgres)

A semicolon separated list of SQL statements to be executed when a JDBC connection to the database is established. Note that the connector may establish JDBC connections at its own discretion, so this should typically be used for configuration of session parameters only, but not for executing DML statements. Use doubled semicolon (';;') to use a semicolon as a character and not as a delimiter.

String

databasePassword (postgres)

Required Password of the database user to be used when connecting to the database.

String

databasePort (postgres)

Port of the database server.

5432

int

databaseQueryTimeoutMs (postgres)

Time to wait for a query to execute, given in milliseconds. Defaults to 600 seconds (600,000 ms); zero means there is no limit.

10m

int

databaseSslcert (postgres)

File containing the SSL Certificate for the client. See the Postgres SSL docs for further information.

String

databaseSslfactory (postgres)

A name of class to that creates SSL Sockets. Use org.postgresql.ssl.NonValidatingFactory to disable SSL validation in development environments.

String

databaseSslkey (postgres)

File containing the SSL private key for the client. See the Postgres SSL docs for further information.

String

databaseSslmode (postgres)

Whether to use an encrypted connection to Postgres. Options include: 'disable' (the default) to use an unencrypted connection; 'allow' to try and use an unencrypted connection first and, failing that, a secure (encrypted) connection; 'prefer' (the default) to try and use a secure (encrypted) connection first and, failing that, an unencrypted connection; 'require' to use a secure (encrypted) connection, and fail if one cannot be established; 'verify-ca' like 'required' but additionally verify the server TLS certificate against the configured Certificate Authority (CA) certificates, or fail if no valid matching CA certificates are found; or 'verify-full' like 'verify-ca' but additionally verify that the server certificate matches the host to which the connection is attempted.

prefer

String

databaseSslpassword (postgres)

Password to access the client private key from the file specified by 'database.sslkey'. See the Postgres SSL docs for further information.

String

databaseSslrootcert (postgres)

File containing the root certificate(s) against which the server is validated. See the Postgres JDBC SSL docs for further information.

String

databaseTcpkeepalive (postgres)

Enable or disable TCP keep-alive probe to avoid dropping TCP connection.

true

boolean

databaseUser (postgres)

Name of the database user to be used when connecting to the database.

String

datatypePropagateSourceType (postgres)

A comma-separated list of regular expressions matching the database-specific data type names that adds the data type’s original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

decimalHandlingMode (postgres)

Specify how DECIMAL and NUMERIC columns should be represented in change events, including: 'precise' (the default) uses java.math.BigDecimal to represent values, which are encoded in the change events using a binary representation and Kafka Connect’s 'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent values; 'double' represents values using Java’s 'double', which may not offer the precision but will be far easier to use in consumers.

precise

String

errorsMaxRetries (postgres)

The maximum number of retries on connection errors before failing (-1 = no limit, 0 = disabled, 0 = num of retries).

-1

int

eventProcessingFailureHandlingMode (postgres)

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including: 'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped; 'ignore' the problematic event will be skipped.

fail

String

flushLsnSource (postgres)

Boolean to determine if Debezium should flush LSN in the source postgres database. If set to false, user will have to flush the LSN manually outside Debezium.

true

boolean

heartbeatActionQuery (postgres)

The query executed with every heartbeat.

String

heartbeatIntervalMs (postgres)

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default.

0ms

int

heartbeatTopicsPrefix (postgres)

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

__debezium-heartbeat

String

hstoreHandlingMode (postgres)

Specify how HSTORE columns should be represented in change events, including: 'json' represents values as string-ified JSON (default); 'map' represents values as a key/value map.

json

String

includeSchemaComments (postgres)

Whether the connector parse table and column’s comment to metadata object. Note: Enable this option will bring the implications on memory usage. The number and size of ColumnImpl objects is what largely impacts how much memory is consumed by the Debezium connectors, and adding a String to each of them can potentially be quite heavy. The default is 'false'.

false

boolean

includeUnknownDatatypes (postgres)

Specify whether the fields of data type not supported by Debezium should be processed: 'false' (the default) omits the fields; 'true' converts the field into an implementation dependent binary representation.

false

boolean

incrementalSnapshotChunkSize (postgres)

The maximum size of chunk (number of documents/rows) for incremental snapshotting.

1024

int

incrementalSnapshotWatermarkingStrategy (postgres)

Specify the strategy used for watermarking during an incremental snapshot: 'insert_insert' both open and close signal is written into signal data collection (default); 'insert_delete' only open signal is written on signal data collection, the close will delete the relative open signal;.

INSERT_INSERT

String

intervalHandlingMode (postgres)

Specify how INTERVAL columns should be represented in change events, including: 'string' represents values as an exact ISO formatted string; 'numeric' (default) represents values using the inexact conversion into microseconds.

numeric

String

maxBatchSize (postgres)

Maximum size of each batch of source records. Defaults to 2048.

2048

int

maxQueueSize (postgres)

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

8192

int

maxQueueSizeInBytes (postgres)

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled.

0

long

messageKeyColumns (postgres)

A semicolon-separated list of expressions that match fully-qualified tables and column(s) to be used as message key. Each expression must match the pattern ':', where the table names could be defined as (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific connector, and the key columns are a comma-separated list of columns representing the custom key. For any table without an explicit key configuration the table’s primary key column(s) will be used as message key. Example: dbserver1.inventory.orderlines:orderId,orderLineId;dbserver1.inventory.orders:id.

String

messagePrefixExcludeList (postgres)

A comma-separated list of regular expressions that match the logical decoding message prefixes to be excluded from monitoring.

String

messagePrefixIncludeList (postgres)

A comma-separated list of regular expressions that match the logical decoding message prefixes to be monitored. All prefixes are monitored by default.

String

notificationEnabledChannels (postgres)

List of notification channels names that are enabled.

String

notificationSinkTopicName (postgres)

The name of the topic for the notifications. This is required in case 'sink' is in the list of enabled channels.

String

pluginName (postgres)

The name of the Postgres logical decoding plugin installed on the server. Supported values are 'decoderbufs' and 'pgoutput'. Defaults to 'decoderbufs'.

decoderbufs

String

pollIntervalMs (postgres)

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms.

500ms

long

postProcessors (postgres)

Optional list of post processors. The processors are defined using '.type' config option and configured using options ''.

String

provideTransactionMetadata (postgres)

Enables transaction metadata extraction together with event counting.

false

boolean

publicationAutocreateMode (postgres)

Applies only when streaming changes using pgoutput.Determine how creation of a publication should work, the default is all_tables.DISABLED - The connector will not attempt to create a publication at all. The expectation is that the user has created the publication up-front. If the publication isn’t found to exist upon startup, the connector will throw an exception and stop.ALL_TABLES - If no publication exists, the connector will create a new publication for all tables. Note this requires that the configured user has access. If the publication already exists, it will be used. i.e CREATE PUBLICATION FOR ALL TABLES;FILTERED - If no publication exists, the connector will create a new publication for all those tables matchingthe current filter configuration (see table/database include/exclude list properties). If the publication already exists, it will be used. i.e CREATE PUBLICATION FOR TABLE.

all_tables

String

publicationName (postgres)

The name of the Postgres 10 publication used for streaming changes from a plugin. Defaults to 'dbz_publication'.

dbz_publication

String

queryFetchSize (postgres)

The maximum number of records that should be loaded into memory while streaming. A value of '0' uses the default JDBC fetch size.

0

int

replicaIdentityAutosetValues (postgres)

Applies only when streaming changes using pgoutput.Determines the value for Replica Identity at table level. This option will overwrite the existing value in databaseA comma-separated list of regular expressions that match fully-qualified tables and Replica Identity value to be used in the table. Each expression must match the pattern ':', where the table names could be defined as (SCHEMA_NAME.TABLE_NAME), and the replica identity values are: DEFAULT - Records the old values of the columns of the primary key, if any. This is the default for non-system tables.INDEX index_name - Records the old values of the columns covered by the named index, that must be unique, not partial, not deferrable, and include only columns marked NOT NULL. If this index is dropped, the behavior is the same as NOTHING.FULL - Records the old values of all columns in the row.NOTHING - Records no information about the old row. This is the default for system tables.

String

retriableRestartConnectorWaitMs (postgres)

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms.

10s

long

schemaExcludeList (postgres)

The schemas for which events must not be captured.

String

schemaHistoryInternalFileFilename (postgres)

The path to the file that will be used to record the database schema history.

String

schemaIncludeList (postgres)

The schemas for which events should be captured.

String

schemaNameAdjustmentMode (postgres)

Specify how schema names should be adjusted for compatibility with the message converter used by the connector, including: 'avro' replaces the characters that cannot be used in the Avro type name with underscore; 'avro_unicode' replaces the underscore or characters that cannot be used in the Avro type name with corresponding unicode like _uxxxx. Note: _ is an escape sequence like backslash in Java;'none' does not apply any adjustment (default).

none

String

schemaRefreshMode (postgres)

Specify the conditions that trigger a refresh of the in-memory schema for a table. 'columns_diff' (the default) is the safest mode, ensuring the in-memory schema stays in-sync with the database table’s schema at all times. 'columns_diff_exclude_unchanged_toast' instructs the connector to refresh the in-memory schema cache if there is a discrepancy between it and the schema derived from the incoming message, unless unchanged TOASTable data fully accounts for the discrepancy. This setting can improve connector performance significantly if there are frequently-updated tables that have TOASTed data that are rarely part of these updates. However, it is possible for the in-memory schema to become outdated if TOASTable columns are dropped from the table.

columns_diff

String

signalDataCollection (postgres)

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

signalEnabledChannels (postgres)

List of channels names that are enabled. Source channel is enabled by default.

source

String

signalPollIntervalMs (postgres)

Interval for looking for new signals in registered channels, given in milliseconds. Defaults to 5 seconds.

5s

long

skippedOperations (postgres)

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes, 't' for truncates, and 'none' to indicate nothing skipped. By default, only truncate operations will be skipped.

t

String

slotDropOnStop (postgres)

Whether or not to drop the logical replication slot when the connector finishes orderly. By default the replication is kept so that on restart progress can resume from the last recorded location.

false

boolean

slotMaxRetries (postgres)

How many times to retry connecting to a replication slot when an attempt fails.

6

int

slotName (postgres)

The name of the Postgres logical decoding slot created for streaming changes from a plugin. Defaults to 'debezium.

debezium

String

slotRetryDelayMs (postgres)

Time to wait between retry attempts when the connector fails to connect to a replication slot, given in milliseconds. Defaults to 10 seconds (10,000 ms).

10s

long

slotStreamParams (postgres)

Any optional parameters used by logical decoding plugin. Semi-colon separated. E.g. 'add-tables=public.table,public.table2;include-lsn=true'.

String

snapshotDelayMs (postgres)

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms.

0ms

long

snapshotFetchSize (postgres)

The maximum number of records that should be loaded into memory while performing a snapshot.

int

snapshotIncludeCollectionList (postgres)

This setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

snapshotIsolationMode (postgres)

Controls which transaction isolation level is used. The default is 'serializable', which means that serializable isolation level is used. When 'repeatable_read' is specified, connector runs the initial snapshot in REPEATABLE READ isolation level. When 'read_committed' is specified, connector runs the initial snapshot in READ COMMITTED isolation level. In 'read_uncommitted' is specified, connector runs the initial snapshot in READ UNCOMMITTED isolation level.

serializable

String

snapshotLockingMode (postgres)

Controls how the connector holds locks on tables while performing the schema snapshot. The 'shared' which means the connector will hold a table lock that prevents exclusive table access for just the initial portion of the snapshot while the database schemas and other metadata are being read. The remaining work in a snapshot involves selecting all rows from each table, and this is done using a flashback query that requires no locks. However, in some cases it may be desirable to avoid locks entirely which can be done by specifying 'none'. This mode is only safe to use if no schema changes are happening while the snapshot is taken.

none

String

snapshotLockingModeCustomName (postgres)

When 'snapshot.locking.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'SnapshotterLocking' interface and is called to determine how to lock tables during schema snapshot.

String

snapshotLockTimeoutMs (postgres)

The maximum number of millis to wait for table locks at the beginning of a snapshot. If locks cannot be acquired in this time frame, the snapshot will be aborted. Defaults to 10 seconds.

10s

long

snapshotMaxThreads (postgres)

The maximum number of threads used to perform the snapshot. Defaults to 1.

1

int

snapshotMode (postgres)

The criteria for running a snapshot upon startup of the connector. Select one of the following snapshot options: 'always': The connector runs a snapshot every time that it starts. After the snapshot completes, the connector begins to stream changes from the transaction log.; 'initial' (default): If the connector does not detect any offsets for the logical server name, it runs a snapshot that captures the current full state of the configured tables. After the snapshot completes, the connector begins to stream changes from the transaction log. 'initial_only': The connector performs a snapshot as it does for the 'initial' option, but after the connector completes the snapshot, it stops, and does not stream changes from the transaction log.; 'never': The connector does not run a snapshot. Upon first startup, the connector immediately begins reading from the beginning of the transaction log. 'exported': This option is deprecated; use 'initial' instead.; 'custom': The connector loads a custom class to specify how the connector performs snapshots. For more information, see Custom snapshotter SPI in the PostgreSQL connector documentation.

initial

String

snapshotModeConfigurationBasedSnapshotData (postgres)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not.

false

boolean

snapshotModeConfigurationBasedSnapshotOnDataError (postgres)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not in case of error.

false

boolean

snapshotModeConfigurationBasedSnapshotOnSchemaError (postgres)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not in case of error.

false

boolean

snapshotModeConfigurationBasedSnapshotSchema (postgres)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not.

false

boolean

snapshotModeConfigurationBasedStartStream (postgres)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the stream should start or not after snapshot.

false

boolean

snapshotModeCustomName (postgres)

When 'snapshot.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'Snapshotter' interface and is called on each app boot to determine whether to do a snapshot.

String

snapshotQueryMode (postgres)

Controls query used during the snapshot.

select_all

String

snapshotQueryModeCustomName (postgres)

When 'snapshot.query.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'SnapshotterQuery' interface and is called to determine how to build queries during snapshot.

String

snapshotSelectStatementOverrides (postgres)

This property contains a comma-separated list of fully-qualified tables (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific connectors. Select statements for the individual tables are specified in further configuration properties, one for each table, identified by the id 'snapshot.select.statement.overrides.DB_NAME.TABLE_NAME' or 'snapshot.select.statement.overrides.SCHEMA_NAME.TABLE_NAME', respectively. The value of those properties is the select statement to use when retrieving data from the specific table during snapshotting. A possible use case for large append-only tables is setting a specific point where to start (resume) snapshotting, in case a previous snapshotting was interrupted.

String

snapshotTablesOrderByRowCount (postgres)

Controls the order in which tables are processed in the initial snapshot. A descending value will order the tables by row count descending. A ascending value will order the tables by row count ascending. A value of disabled (the default) will disable ordering by row count.

disabled

String

sourceinfoStructMaker (postgres)

The name of the SourceInfoStructMaker class that returns SourceInfo schema and struct.

io.debezium.connector.postgresql.PostgresSourceInfoStructMaker

String

statusUpdateIntervalMs (postgres)

Frequency for sending replication connection status updates to the server, given in milliseconds. Defaults to 10 seconds (10,000 ms).

10s

int

streamingDelayMs (postgres)

A delay period after the snapshot is completed and the streaming begins, given in milliseconds. Defaults to 0 ms.

0ms

long

tableExcludeList (postgres)

A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring.

String

tableIgnoreBuiltin (postgres)

Flag specifying whether built-in tables should be ignored.

true

boolean

tableIncludeList (postgres)

The tables for which changes are to be captured.

String

timePrecisionMode (postgres)

Time, date, and timestamps can be represented with different kinds of precisions, including: 'adaptive' (the default) bases the precision of time, date, and timestamp values on the database column’s precision; 'adaptive_time_microseconds' like 'adaptive' mode, but TIME fields always use microseconds precision; 'connect' always represents time, date, and timestamp values using Kafka Connect’s built-in representations for Time, Date, and Timestamp, which uses millisecond precision regardless of the database columns' precision.

adaptive

String

tombstonesOnDelete (postgres)

Whether delete operations should be represented by a delete event and a subsequent tombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

false

boolean

topicNamingStrategy (postgres)

The name of the TopicNamingStrategy class that should be used to determine the topic name for data change, schema change, transaction, heartbeat event etc.

io.debezium.schema.SchemaTopicNamingStrategy

String

topicPrefix (postgres)

Required Topic prefix that identifies and provides a namespace for the particular database server/cluster is capturing changes. The topic prefix should be unique across all other connectors, since it is used as a prefix for all Kafka topic names that receive events emitted by this connector. Only alphanumeric characters, hyphens, dots and underscores must be accepted.

String

transactionMetadataFactory (postgres)

Class to make transaction context & transaction struct/schemas.

io.debezium.pipeline.txmetadata.DefaultTransactionMetadataFactory

String

unavailableValuePlaceholder (postgres)

Specify the constant that will be provided by Debezium to indicate that the original value is a toasted value not provided by the database. If starts with 'hex:' prefix it is expected that the rest of the string represents hexadecimal encoded octets.

__debezium_unavailable_value

String

xminFetchIntervalMs (postgres)

Specify how often (in ms) the xmin will be fetched from the replication slot. This xmin value is exposed by the slot which gives a lower bound of where a new replication slot could start from. The lower the value, the more likely this value is to be the current 'true' value, but the bigger the performance cost. The bigger the value, the less likely this value is to be the current 'true' value, but the lower the performance penalty. The default is set to 0 ms, which disables tracking xmin.

0ms

long

For more information about configuration: https://debezium.io/documentation/reference/0.10/operations/embedded.html#engine-properties https://debezium.io/documentation/reference/0.10/connectors/postgresql.html#connector-properties

Message Headers

The Debezium PostgresSQL Connector component supports 7 message header(s), which is/are listed below:

Name Description Default Type

CamelDebeziumSourceMetadata (consumer)

Constant: HEADER_SOURCE_METADATA

The metadata about the source event, for example table name, database name, log position, etc, please refer to the Debezium documentation for more info.

Map

CamelDebeziumIdentifier (consumer)

Constant: HEADER_IDENTIFIER

The identifier of the connector, normally is this format {server-name}.{database-name}.{table-name}.

String

CamelDebeziumKey (consumer)

Constant: HEADER_KEY

The key of the event, normally is the table Primary Key.

Struct

CamelDebeziumOperation (consumer)

Constant: HEADER_OPERATION

If presents, the type of event operation. Values for the connector are c for create (or insert), u for update, d for delete or r for read (in the case of a initial sync) or in case of a snapshot event.

String

CamelDebeziumTimestamp (consumer)

Constant: HEADER_TIMESTAMP

If presents, the time (using the system clock in the JVM) at which the connector processed the event.

Long

CamelDebeziumBefore (consumer)

Constant: HEADER_BEFORE

If presents, contains the state of the row before the event occurred.

Struct

CamelDebeziumDdlSQL (consumer)

Constant: HEADER_DDL_SQL

If presents, the ddl sql text of the event.

String

Usage

Message body

The message body if is not null (in case of tombstones), it contains the state of the row after the event occurred as Struct format or Map format if you use the included Type Converter from Struct to Map.

Check below for more details.

Examples

Consuming events

Here is a basic route that you can use to listen to Debezium events from PostgresSQL connector.

from("debezium-postgres:dbz-test-1?offsetStorageFileName=/usr/offset-file-1.dat&databaseHostname=localhost&databaseUser=debezium&databasePassword=dbz&databaseServerName=my-app-connector&databaseHistoryFileFilename=/usr/history-file-1.dat")
    .log("Event received from Debezium : ${body}")
    .log("    with this identifier ${headers.CamelDebeziumIdentifier}")
    .log("    with these source metadata ${headers.CamelDebeziumSourceMetadata}")
    .log("    the event occurred upon this operation '${headers.CamelDebeziumSourceOperation}'")
    .log("    on this database '${headers.CamelDebeziumSourceMetadata[db]}' and this table '${headers.CamelDebeziumSourceMetadata[table]}'")
    .log("    with the key ${headers.CamelDebeziumKey}")
    .log("    the previous value is ${headers.CamelDebeziumBefore}")

By default, the component will emit the events in the body and CamelDebeziumBefore header as Struct data type, the reasoning behind this, is to perceive the schema information in case is needed. However, the component as well contains a Type Converter that converts from default output type of Struct to Map in order to leverage Camel’s rich Data Format types which many of them work out of box with Map data type. To use it, you can either add Map.class type when you access the message (e.g., exchange.getIn().getBody(Map.class)), or you can convert the body always to Map from the route builder by adding .convertBodyTo(Map.class) to your Camel Route DSL after from statement.

We mentioned above the schema, which can be used in case you need to perform advance data transformation and the schema is needed for that. If you choose not to convert your body to Map, you can obtain the schema information as Schema type from Struct like this:

from("debezium-postgres:[name]?[options]])
    .process(exchange -> {
        final Struct bodyValue = exchange.getIn().getBody(Struct.class);
        final Schema schemaValue = bodyValue.schema();

        log.info("Body value is : {}", bodyValue);
        log.info("With Schema : {}", schemaValue);
        log.info("And fields of : {}", schemaValue.fields());
        log.info("Field name has `{}` type", schemaValue.field("name").schema());
    });

This component is a thin wrapper around Debezium Engine as mentioned. Therefore, before using this component in production, you need to understand how Debezium works and how configurations can reflect the expected behavior. This is especially true in regard to handling failures.

Spring Boot Auto-Configuration

When using debezium-postgres with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-debezium-postgres-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 112 options, which are listed below.

Name Description Default Type

camel.component.debezium-postgres.additional-properties

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro.

Map

camel.component.debezium-postgres.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.debezium-postgres.binary-handling-mode

Specify how binary (blob, binary, etc.) columns should be represented in change events, including: 'bytes' represents binary data as byte array (default); 'base64' represents binary data as base64-encoded string; 'base64-url-safe' represents binary data as base64-url-safe-encoded string; 'hex' represents binary data as hex-encoded (base16) string.

bytes

String

camel.component.debezium-postgres.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.debezium-postgres.column-exclude-list

Regular expressions matching columns to exclude from change events.

String

camel.component.debezium-postgres.column-include-list

Regular expressions matching columns to include in change events.

String

camel.component.debezium-postgres.column-propagate-source-type

A comma-separated list of regular expressions matching fully-qualified names of columns that adds the columns original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

camel.component.debezium-postgres.configuration

Allow pre-configured Configurations to be set. The option is a org.apache.camel.component.debezium.postgres.configuration.PostgresConnectorEmbeddedDebeziumConfiguration type.

PostgresConnectorEmbeddedDebeziumConfiguration

camel.component.debezium-postgres.converters

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'.

String

camel.component.debezium-postgres.custom-metric-tags

The custom metric tags will accept key-value pairs to customize the MBean object name which should be appended the end of regular name, each key would represent a tag for the MBean object name, and the corresponding value would be the value of that tag the key is. For example: k1=v1,k2=v2.

String

camel.component.debezium-postgres.database-dbname

The name of the database from which the connector should capture changes.

String

camel.component.debezium-postgres.database-hostname

Resolvable hostname or IP address of the database server.

String

camel.component.debezium-postgres.database-initial-statements

A semicolon separated list of SQL statements to be executed when a JDBC connection to the database is established. Note that the connector may establish JDBC connections at its own discretion, so this should typically be used for configuration of session parameters only, but not for executing DML statements. Use doubled semicolon (';;') to use a semicolon as a character and not as a delimiter.

String

camel.component.debezium-postgres.database-password

Password of the database user to be used when connecting to the database.

String

camel.component.debezium-postgres.database-port

Port of the database server.

5432

Integer

camel.component.debezium-postgres.database-query-timeout-ms

Time to wait for a query to execute, given in milliseconds. Defaults to 600 seconds (600,000 ms); zero means there is no limit. The option is a int type.

600000

Integer

camel.component.debezium-postgres.database-sslcert

File containing the SSL Certificate for the client. See the Postgres SSL docs for further information.

String

camel.component.debezium-postgres.database-sslfactory

A name of class to that creates SSL Sockets. Use org.postgresql.ssl.NonValidatingFactory to disable SSL validation in development environments.

String

camel.component.debezium-postgres.database-sslkey

File containing the SSL private key for the client. See the Postgres SSL docs for further information.

String

camel.component.debezium-postgres.database-sslmode

Whether to use an encrypted connection to Postgres. Options include: 'disable' (the default) to use an unencrypted connection; 'allow' to try and use an unencrypted connection first and, failing that, a secure (encrypted) connection; 'prefer' (the default) to try and use a secure (encrypted) connection first and, failing that, an unencrypted connection; 'require' to use a secure (encrypted) connection, and fail if one cannot be established; 'verify-ca' like 'required' but additionally verify the server TLS certificate against the configured Certificate Authority (CA) certificates, or fail if no valid matching CA certificates are found; or 'verify-full' like 'verify-ca' but additionally verify that the server certificate matches the host to which the connection is attempted.

prefer

String

camel.component.debezium-postgres.database-sslpassword

Password to access the client private key from the file specified by 'database.sslkey'. See the Postgres SSL docs for further information.

String

camel.component.debezium-postgres.database-sslrootcert

File containing the root certificate(s) against which the server is validated. See the Postgres JDBC SSL docs for further information.

String

camel.component.debezium-postgres.database-tcpkeepalive

Enable or disable TCP keep-alive probe to avoid dropping TCP connection.

true

Boolean

camel.component.debezium-postgres.database-user

Name of the database user to be used when connecting to the database.

String

camel.component.debezium-postgres.datatype-propagate-source-type

A comma-separated list of regular expressions matching the database-specific data type names that adds the data type’s original type and original length as parameters to the corresponding field schemas in the emitted change records.

String

camel.component.debezium-postgres.decimal-handling-mode

Specify how DECIMAL and NUMERIC columns should be represented in change events, including: 'precise' (the default) uses java.math.BigDecimal to represent values, which are encoded in the change events using a binary representation and Kafka Connect’s 'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent values; 'double' represents values using Java’s 'double', which may not offer the precision but will be far easier to use in consumers.

precise

String

camel.component.debezium-postgres.enabled

Whether to enable auto configuration of the debezium-postgres component. This is enabled by default.

Boolean

camel.component.debezium-postgres.errors-max-retries

The maximum number of retries on connection errors before failing (-1 = no limit, 0 = disabled, 0 = num of retries).

-1

Integer

camel.component.debezium-postgres.event-processing-failure-handling-mode

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including: 'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped; 'ignore' the problematic event will be skipped.

fail

String

camel.component.debezium-postgres.flush-lsn-source

Boolean to determine if Debezium should flush LSN in the source postgres database. If set to false, user will have to flush the LSN manually outside Debezium.

true

Boolean

camel.component.debezium-postgres.heartbeat-action-query

The query executed with every heartbeat.

String

camel.component.debezium-postgres.heartbeat-interval-ms

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default. The option is a int type.

0

Integer

camel.component.debezium-postgres.heartbeat-topics-prefix

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

__debezium-heartbeat

String

camel.component.debezium-postgres.hstore-handling-mode

Specify how HSTORE columns should be represented in change events, including: 'json' represents values as string-ified JSON (default); 'map' represents values as a key/value map.

json

String

camel.component.debezium-postgres.include-schema-comments

Whether the connector parse table and column’s comment to metadata object. Note: Enable this option will bring the implications on memory usage. The number and size of ColumnImpl objects is what largely impacts how much memory is consumed by the Debezium connectors, and adding a String to each of them can potentially be quite heavy. The default is 'false'.

false

Boolean

camel.component.debezium-postgres.include-unknown-datatypes

Specify whether the fields of data type not supported by Debezium should be processed: 'false' (the default) omits the fields; 'true' converts the field into an implementation dependent binary representation.

false

Boolean

camel.component.debezium-postgres.incremental-snapshot-chunk-size

The maximum size of chunk (number of documents/rows) for incremental snapshotting.

1024

Integer

camel.component.debezium-postgres.incremental-snapshot-watermarking-strategy

Specify the strategy used for watermarking during an incremental snapshot: 'insert_insert' both open and close signal is written into signal data collection (default); 'insert_delete' only open signal is written on signal data collection, the close will delete the relative open signal;.

INSERT_INSERT

String

camel.component.debezium-postgres.internal-key-converter

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

camel.component.debezium-postgres.internal-value-converter

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

camel.component.debezium-postgres.interval-handling-mode

Specify how INTERVAL columns should be represented in change events, including: 'string' represents values as an exact ISO formatted string; 'numeric' (default) represents values using the inexact conversion into microseconds.

numeric

String

camel.component.debezium-postgres.max-batch-size

Maximum size of each batch of source records. Defaults to 2048.

2048

Integer

camel.component.debezium-postgres.max-queue-size

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

8192

Integer

camel.component.debezium-postgres.max-queue-size-in-bytes

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled.

0

Long

camel.component.debezium-postgres.message-key-columns

A semicolon-separated list of expressions that match fully-qualified tables and column(s) to be used as message key. Each expression must match the pattern ':', where the table names could be defined as (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific connector, and the key columns are a comma-separated list of columns representing the custom key. For any table without an explicit key configuration the table’s primary key column(s) will be used as message key. Example: dbserver1.inventory.orderlines:orderId,orderLineId;dbserver1.inventory.orders:id.

String

camel.component.debezium-postgres.message-prefix-exclude-list

A comma-separated list of regular expressions that match the logical decoding message prefixes to be excluded from monitoring.

String

camel.component.debezium-postgres.message-prefix-include-list

A comma-separated list of regular expressions that match the logical decoding message prefixes to be monitored. All prefixes are monitored by default.

String

camel.component.debezium-postgres.notification-enabled-channels

List of notification channels names that are enabled.

String

camel.component.debezium-postgres.notification-sink-topic-name

The name of the topic for the notifications. This is required in case 'sink' is in the list of enabled channels.

String

camel.component.debezium-postgres.offset-commit-policy

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

String

camel.component.debezium-postgres.offset-commit-timeout-ms

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds. The option is a long type.

5000

Long

camel.component.debezium-postgres.offset-flush-interval-ms

Interval at which to try committing offsets. The default is 1 minute. The option is a long type.

60000

Long

camel.component.debezium-postgres.offset-storage

The name of the Java class that is responsible for persistence of connector offsets.

org.apache.kafka.connect.storage.FileOffsetBackingStore

String

camel.component.debezium-postgres.offset-storage-file-name

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

camel.component.debezium-postgres.offset-storage-partitions

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

Integer

camel.component.debezium-postgres.offset-storage-replication-factor

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore.

Integer

camel.component.debezium-postgres.offset-storage-topic

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

camel.component.debezium-postgres.plugin-name

The name of the Postgres logical decoding plugin installed on the server. Supported values are 'decoderbufs' and 'pgoutput'. Defaults to 'decoderbufs'.

decoderbufs

String

camel.component.debezium-postgres.poll-interval-ms

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms. The option is a long type.

500

Long

camel.component.debezium-postgres.post-processors

Optional list of post processors. The processors are defined using '.type' config option and configured using options ''.

String

camel.component.debezium-postgres.provide-transaction-metadata

Enables transaction metadata extraction together with event counting.

false

Boolean

camel.component.debezium-postgres.publication-autocreate-mode

Applies only when streaming changes using pgoutput.Determine how creation of a publication should work, the default is all_tables.DISABLED - The connector will not attempt to create a publication at all. The expectation is that the user has created the publication up-front. If the publication isn’t found to exist upon startup, the connector will throw an exception and stop.ALL_TABLES - If no publication exists, the connector will create a new publication for all tables. Note this requires that the configured user has access. If the publication already exists, it will be used. i.e CREATE PUBLICATION FOR ALL TABLES;FILTERED - If no publication exists, the connector will create a new publication for all those tables matchingthe current filter configuration (see table/database include/exclude list properties). If the publication already exists, it will be used. i.e CREATE PUBLICATION FOR TABLE.

all_tables

String

camel.component.debezium-postgres.publication-name

The name of the Postgres 10 publication used for streaming changes from a plugin. Defaults to 'dbz_publication'.

dbz_publication

String

camel.component.debezium-postgres.query-fetch-size

The maximum number of records that should be loaded into memory while streaming. A value of '0' uses the default JDBC fetch size.

0

Integer

camel.component.debezium-postgres.replica-identity-autoset-values

Applies only when streaming changes using pgoutput.Determines the value for Replica Identity at table level. This option will overwrite the existing value in databaseA comma-separated list of regular expressions that match fully-qualified tables and Replica Identity value to be used in the table. Each expression must match the pattern ':', where the table names could be defined as (SCHEMA_NAME.TABLE_NAME), and the replica identity values are: DEFAULT - Records the old values of the columns of the primary key, if any. This is the default for non-system tables.INDEX index_name - Records the old values of the columns covered by the named index, that must be unique, not partial, not deferrable, and include only columns marked NOT NULL. If this index is dropped, the behavior is the same as NOTHING.FULL - Records the old values of all columns in the row.NOTHING - Records no information about the old row. This is the default for system tables.

String

camel.component.debezium-postgres.retriable-restart-connector-wait-ms

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms. The option is a long type.

10000

Long

camel.component.debezium-postgres.schema-exclude-list

The schemas for which events must not be captured.

String

camel.component.debezium-postgres.schema-history-internal-file-filename

The path to the file that will be used to record the database schema history.

String

camel.component.debezium-postgres.schema-include-list

The schemas for which events should be captured.

String

camel.component.debezium-postgres.schema-name-adjustment-mode

Specify how schema names should be adjusted for compatibility with the message converter used by the connector, including: 'avro' replaces the characters that cannot be used in the Avro type name with underscore; 'avro_unicode' replaces the underscore or characters that cannot be used in the Avro type name with corresponding unicode like _uxxxx. Note: _ is an escape sequence like backslash in Java;'none' does not apply any adjustment (default).

none

String

camel.component.debezium-postgres.schema-refresh-mode

Specify the conditions that trigger a refresh of the in-memory schema for a table. 'columns_diff' (the default) is the safest mode, ensuring the in-memory schema stays in-sync with the database table’s schema at all times. 'columns_diff_exclude_unchanged_toast' instructs the connector to refresh the in-memory schema cache if there is a discrepancy between it and the schema derived from the incoming message, unless unchanged TOASTable data fully accounts for the discrepancy. This setting can improve connector performance significantly if there are frequently-updated tables that have TOASTed data that are rarely part of these updates. However, it is possible for the in-memory schema to become outdated if TOASTable columns are dropped from the table.

columns_diff

String

camel.component.debezium-postgres.signal-data-collection

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

camel.component.debezium-postgres.signal-enabled-channels

List of channels names that are enabled. Source channel is enabled by default.

source

String

camel.component.debezium-postgres.signal-poll-interval-ms

Interval for looking for new signals in registered channels, given in milliseconds. Defaults to 5 seconds. The option is a long type.

5000

Long

camel.component.debezium-postgres.skipped-operations

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes, 't' for truncates, and 'none' to indicate nothing skipped. By default, only truncate operations will be skipped.

t

String

camel.component.debezium-postgres.slot-drop-on-stop

Whether or not to drop the logical replication slot when the connector finishes orderly. By default the replication is kept so that on restart progress can resume from the last recorded location.

false

Boolean

camel.component.debezium-postgres.slot-max-retries

How many times to retry connecting to a replication slot when an attempt fails.

6

Integer

camel.component.debezium-postgres.slot-name

The name of the Postgres logical decoding slot created for streaming changes from a plugin. Defaults to 'debezium.

debezium

String

camel.component.debezium-postgres.slot-retry-delay-ms

Time to wait between retry attempts when the connector fails to connect to a replication slot, given in milliseconds. Defaults to 10 seconds (10,000 ms). The option is a long type.

10000

Long

camel.component.debezium-postgres.slot-stream-params

Any optional parameters used by logical decoding plugin. Semi-colon separated. E.g. 'add-tables=public.table,public.table2;include-lsn=true'.

String

camel.component.debezium-postgres.snapshot-delay-ms

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms. The option is a long type.

0

Long

camel.component.debezium-postgres.snapshot-fetch-size

The maximum number of records that should be loaded into memory while performing a snapshot.

Integer

camel.component.debezium-postgres.snapshot-include-collection-list

This setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

camel.component.debezium-postgres.snapshot-isolation-mode

Controls which transaction isolation level is used. The default is 'serializable', which means that serializable isolation level is used. When 'repeatable_read' is specified, connector runs the initial snapshot in REPEATABLE READ isolation level. When 'read_committed' is specified, connector runs the initial snapshot in READ COMMITTED isolation level. In 'read_uncommitted' is specified, connector runs the initial snapshot in READ UNCOMMITTED isolation level.

serializable

String

camel.component.debezium-postgres.snapshot-lock-timeout-ms

The maximum number of millis to wait for table locks at the beginning of a snapshot. If locks cannot be acquired in this time frame, the snapshot will be aborted. Defaults to 10 seconds. The option is a long type.

10000

Long

camel.component.debezium-postgres.snapshot-locking-mode

Controls how the connector holds locks on tables while performing the schema snapshot. The 'shared' which means the connector will hold a table lock that prevents exclusive table access for just the initial portion of the snapshot while the database schemas and other metadata are being read. The remaining work in a snapshot involves selecting all rows from each table, and this is done using a flashback query that requires no locks. However, in some cases it may be desirable to avoid locks entirely which can be done by specifying 'none'. This mode is only safe to use if no schema changes are happening while the snapshot is taken.

none

String

camel.component.debezium-postgres.snapshot-locking-mode-custom-name

When 'snapshot.locking.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'SnapshotterLocking' interface and is called to determine how to lock tables during schema snapshot.

String

camel.component.debezium-postgres.snapshot-max-threads

The maximum number of threads used to perform the snapshot. Defaults to 1.

1

Integer

camel.component.debezium-postgres.snapshot-mode

The criteria for running a snapshot upon startup of the connector. Select one of the following snapshot options: 'always': The connector runs a snapshot every time that it starts. After the snapshot completes, the connector begins to stream changes from the transaction log.; 'initial' (default): If the connector does not detect any offsets for the logical server name, it runs a snapshot that captures the current full state of the configured tables. After the snapshot completes, the connector begins to stream changes from the transaction log. 'initial_only': The connector performs a snapshot as it does for the 'initial' option, but after the connector completes the snapshot, it stops, and does not stream changes from the transaction log.; 'never': The connector does not run a snapshot. Upon first startup, the connector immediately begins reading from the beginning of the transaction log. 'exported': This option is deprecated; use 'initial' instead.; 'custom': The connector loads a custom class to specify how the connector performs snapshots. For more information, see Custom snapshotter SPI in the PostgreSQL connector documentation.

initial

String

camel.component.debezium-postgres.snapshot-mode-configuration-based-snapshot-data

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not.

false

Boolean

camel.component.debezium-postgres.snapshot-mode-configuration-based-snapshot-on-data-error

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not in case of error.

false

Boolean

camel.component.debezium-postgres.snapshot-mode-configuration-based-snapshot-on-schema-error

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not in case of error.

false

Boolean

camel.component.debezium-postgres.snapshot-mode-configuration-based-snapshot-schema

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not.

false

Boolean

camel.component.debezium-postgres.snapshot-mode-configuration-based-start-stream

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the stream should start or not after snapshot.

false

Boolean

camel.component.debezium-postgres.snapshot-mode-custom-name

When 'snapshot.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'Snapshotter' interface and is called on each app boot to determine whether to do a snapshot.

String

camel.component.debezium-postgres.snapshot-query-mode

Controls query used during the snapshot.

select_all

String

camel.component.debezium-postgres.snapshot-query-mode-custom-name

When 'snapshot.query.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'SnapshotterQuery' interface and is called to determine how to build queries during snapshot.

String

camel.component.debezium-postgres.snapshot-select-statement-overrides

This property contains a comma-separated list of fully-qualified tables (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific connectors. Select statements for the individual tables are specified in further configuration properties, one for each table, identified by the id 'snapshot.select.statement.overrides.DB_NAME.TABLE_NAME' or 'snapshot.select.statement.overrides.SCHEMA_NAME.TABLE_NAME', respectively. The value of those properties is the select statement to use when retrieving data from the specific table during snapshotting. A possible use case for large append-only tables is setting a specific point where to start (resume) snapshotting, in case a previous snapshotting was interrupted.

String

camel.component.debezium-postgres.snapshot-tables-order-by-row-count

Controls the order in which tables are processed in the initial snapshot. A descending value will order the tables by row count descending. A ascending value will order the tables by row count ascending. A value of disabled (the default) will disable ordering by row count.

disabled

String

camel.component.debezium-postgres.sourceinfo-struct-maker

The name of the SourceInfoStructMaker class that returns SourceInfo schema and struct.

io.debezium.connector.postgresql.PostgresSourceInfoStructMaker

String

camel.component.debezium-postgres.status-update-interval-ms

Frequency for sending replication connection status updates to the server, given in milliseconds. Defaults to 10 seconds (10,000 ms). The option is a int type.

10000

Integer

camel.component.debezium-postgres.streaming-delay-ms

A delay period after the snapshot is completed and the streaming begins, given in milliseconds. Defaults to 0 ms. The option is a long type.

0

Long

camel.component.debezium-postgres.table-exclude-list

A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring.

String

camel.component.debezium-postgres.table-ignore-builtin

Flag specifying whether built-in tables should be ignored.

true

Boolean

camel.component.debezium-postgres.table-include-list

The tables for which changes are to be captured.

String

camel.component.debezium-postgres.time-precision-mode

Time, date, and timestamps can be represented with different kinds of precisions, including: 'adaptive' (the default) bases the precision of time, date, and timestamp values on the database column’s precision; 'adaptive_time_microseconds' like 'adaptive' mode, but TIME fields always use microseconds precision; 'connect' always represents time, date, and timestamp values using Kafka Connect’s built-in representations for Time, Date, and Timestamp, which uses millisecond precision regardless of the database columns' precision.

adaptive

String

camel.component.debezium-postgres.tombstones-on-delete

Whether delete operations should be represented by a delete event and a subsequent tombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

false

Boolean

camel.component.debezium-postgres.topic-naming-strategy

The name of the TopicNamingStrategy class that should be used to determine the topic name for data change, schema change, transaction, heartbeat event etc.

io.debezium.schema.SchemaTopicNamingStrategy

String

camel.component.debezium-postgres.topic-prefix

Topic prefix that identifies and provides a namespace for the particular database server/cluster is capturing changes. The topic prefix should be unique across all other connectors, since it is used as a prefix for all Kafka topic names that receive events emitted by this connector. Only alphanumeric characters, hyphens, dots and underscores must be accepted.

String

camel.component.debezium-postgres.transaction-metadata-factory

Class to make transaction context & transaction struct/schemas.

io.debezium.pipeline.txmetadata.DefaultTransactionMetadataFactory

String

camel.component.debezium-postgres.unavailable-value-placeholder

Specify the constant that will be provided by Debezium to indicate that the original value is a toasted value not provided by the database. If starts with 'hex:' prefix it is expected that the rest of the string represents hexadecimal encoded octets.

__debezium_unavailable_value

String

camel.component.debezium-postgres.xmin-fetch-interval-ms

Specify how often (in ms) the xmin will be fetched from the replication slot. This xmin value is exposed by the slot which gives a lower bound of where a new replication slot could start from. The lower the value, the more likely this value is to be the current 'true' value, but the bigger the performance cost. The bigger the value, the less likely this value is to be the current 'true' value, but the lower the performance penalty. The default is set to 0 ms, which disables tracking xmin. The option is a long type.

0

Long
Back to top